Home Seals & O-Rings O-Rings Viton (FKM) 75 O-Rings BS220V O-Ring 34.52mm ID x 3.53mm CS – Viton (FKM) 75 Duro
BS220V O-Ring 34.52mm ID x 3.53mm CS - Viton (FKM) 75 Duro
BS220V

Images are for illustrative purposes only. Actual product may vary.

Finer PT

BS220V O-Ring 34.52mm ID x 3.53mm CS – Viton (FKM) 75 Duro

Part Number: BS220V
Inner Diameter (Bore) 34.52 mm
Seal Type O-Ring

BS220V O-ring in viton (fkm) 75 duro. Inside diameter 34.52mm, cross section 3.53mm.

Qty:
  • Ideal where nitrile cannot cope with heat or aggressive media
  • Outstanding high-temperature and chemical resistance
  • Resists petroleum oils, fuels, solvents and many chemicals
  • Typical operating range approximately -20C to +200C
  • Viton (FKM) fluoroelastomer, 75 Shore A hardness
Brand

Finer PT
Seal Type

O-Ring
Material

Viton (FKM) 75 Duro
Series

BS
Measurement System

Imperial
Hardness (Shore A)

75 Shore A
Inner Diameter (Bore)

34.52 mm
Cross Section

3.53 mm
Features & Benefits Ideal where nitrile cannot cope with heat or aggressive media
Outstanding high-temperature and chemical resistance
Resists petroleum oils, fuels, solvents and many chemicals
Typical operating range approximately -20C to +200C
Viton (FKM) fluoroelastomer, 75 Shore A hardness

The BS220V is an O-ring with an inside diameter of 34.52mm and a cross section of 3.53mm (1.359″ ID x 0.139″ CS), moulded in Viton (FKM) 75 Duro.

Viton (FKM) fluoroelastomer offers outstanding resistance to high temperatures, petroleum oils, fuels and a wide range of chemicals, far exceeding nitrile in heat and chemical resistance. Typical operating range approximately -20C to +200C. O-rings are the most common and cost-effective seal for static and dynamic applications, seating in a groove to form a reliable barrier against fluid or gas leakage.

Viton BS Imperial O-Rings 75 Duro
PDF — 744 KB
Download

No reviews yet. Used this part? Be the first to review it.

Related Products

More from the same range. Please check sizes and specifications before ordering.

Expert Assistance

We Help You Find It

Not sure what you need? Our Brisbane-based team actively help customers to identify parts — bring it in, send a photo, or just give us a call.

Bring It In

Walk into our Brendale store with the old part. We'll measure it, match it, and get you sorted on the spot.

Unit 2/348 S Pine Rd, Brendale QLD 4500 Get Directions

Send a Photo

Snap a photo of the part — include something for scale. Upload it here or email it and we'll identify it for you.

sales@pineriversbearings.com.au Upload Photo

Call Our Experts

Tell us what you need over the phone. Our experienced team can identify most parts from a part number, dimensions, application, or even a simple description.

Call (07) 3889 6200