NACHI LM11949/LM11910 Tapered Roller Bearing

NACHI LM11949/LM11910 Tapered Roller Bearing

The NACHI LM11949/LM11910 is a precision imperial (inch-series) tapered roller bearing assembly consisting of cone (inner ring) LM11949 and cup (outer ring) LM11910. Designed to carry combined radial and axial loads efficiently, this bearing features a bore diameter of 17.463 mm, outer diameter of 45.237 mm, and an overall assembly width of 15.494 mm (cone width 16.637 mm, cup width 12.065 mm). As an inch-series bearing, it is a direct interchange for equivalent imperial tapered roller bearings from other manufacturers including Timken, Koyo, and NTN.

Design & Construction

Manufactured by NACHI – one of Japan’s leading bearing producers – the LM11949/LM11910 is precision-ground from high-carbon chromium bearing steel (AISI 52100 / JIS SUJ2), heat-treated to achieve optimum hardness and fatigue resistance. The tapered roller design features conical raceways on both the cone (inner ring) and cup (outer ring), with tapered rollers running between them. This geometry allows the bearing to support combined radial and axial loads simultaneously, with the contact angle determining the ratio of axial to radial load capacity. Imperial-series tapered roller bearings are the most widely used tapered roller configuration worldwide, with extensive application in automotive, agricultural, and general industrial equipment.

Performance

Rated for a basic dynamic load capacity of 29.4 kN and a static load capacity of 30.1 kN, this bearing delivers dependable combined-load support and long calculated service life under correct operating conditions. Permissible speeds reach 9,400 rpm with grease lubrication and 13,000 rpm with oil lubrication. The separable design – where the cone (inner ring with roller and cage assembly) and cup (outer ring) can be mounted independently – simplifies installation, allows adjustment of internal clearance or preload, and facilitates maintenance. Imperial tapered roller bearings are fully interchangeable between manufacturers of the same designation, allowing flexibility in sourcing and replacement.

Typical Applications

• Automotive wheel hubs, differentials, and transmission assemblies
• Agricultural machinery and equipment
• Construction and earthmoving equipment
• Gearboxes, reducers, and power transmission systems
• Conveyor and material-handling systems
• Pumps, compressors, and rotating equipment
• Mining, quarrying, and heavy industrial machinery
• Trailer axles and suspension components
• Marine and boat trailer applications
• General industrial and workshop machinery