Finer PT 100A1-9PB Pilot Bore Sprocket – ASA 100-1 Simplex – 1-1/4″ Pitch – 9 Teeth

The Finer PT 100A1-9PB is a 9 tooth pilot bore sprocket for ASA 100-1 simplex roller chain – 1-1/4″ (31.75mm) pitch. It has a 92.84mm pitch circle diameter (PCD) and a 108mm outside diameter. It comes with a 20mm pilot bore.

A pilot bore sprocket is supplied with a small starter bore so it can be machined out to suit the shaft – keyway and set screws. Finer sprockets are made from high quality steel with induction hardened teeth – improving resistance to wear and extending working life. All Finer sprockets are engineered in accordance with ISO 9000 standards.

Dimensions:

• Hub diameter (dm): 63 mm
• Overall length (A): 40 mm
• Tooth radius (r3): 33.5 mm
• Radius width (C): 4 mm
• Chain: 1-1/4″ (31.75 mm) pitch – 19.05 mm inside width – 19.05 mm roller diameter

BS / ASA interchange (1-1/4″ pitch – BS 20B-1 and ASA 100-1): ASA sprockets will wrap BS chain – BS sprockets may need to have the teeth skimmed to run on ASA chain – the plate thickness differs.

Please note: this pilot bore sprocket is supplied with a 20mm pilot bore – it is not finish bored.

Downloads:

• Finer PT ASA 100 Pilot Bore Sprockets Spec Sheet (PDF)
• Finer PT Sprockets BS / ASA Interchange Chart (PDF)

Supplied by Finer Power Transmissions.