Home Power Transmission Pulleys Taper Lock V-Belt Pulleys SPC Pulleys Finer PT SPC800-06 T/L Taper Lock V-Belt Pulley – 6 Grooves – 800mm PCD
Finer PT SPC800-06 T/L Taper Lock V-Belt Pulley - 6 Grooves - 800mm PCD
SPC800-06 T/L

Images are for illustrative purposes only. Actual product may vary.

Finer PT

Finer PT SPC800-06 T/L Taper Lock V-Belt Pulley – 6 Grooves – 800mm PCD

Part Number: SPC800-06 T/L
Outer Diameter 809.6 mm
Width 162 mm

Finer PT SPC800-06 T/L taper lock v-belt pulley. SPC section – 6 grooves – 800mm PCD x 809.6mm OD. Takes a 5050 taper lock bush – max bore 125mm. Cast iron construction.

Qty:
  • Cast iron construction - dynamically balanced
  • Grooves to the BS 3790 profile - suit SPC wedge belts and C section classical belts
  • No re-boring of the pulley - the bush carries the shaft bore and keyway
  • Pulls up concentric and releases cleanly for maintenance
  • SPC section 6 groove pulley - 800mm PCD
  • Supplied by Finer Power Transmissions
  • Taper lock bore - fits a 5050 bush up to 125mm shaft
Brand

Finer PT
Product Type

Taper Lock V-Belt Pulley
Belt Section

SPC
Number of Grooves

6
Pitch Circle Diameter (PCD)

800 mm
Outer Diameter

809.6 mm
Width

162 mm
Bore Type

Taper Lock
Compatible Parts

5050 Taper Lock Bush
Maximum Bore

125 mm
Construction Type

Type 4
Material

Cast Iron
Measurement System

Metric
Cross Reference Pulley: SPC800-06 | Taper Lock Bush: 5050
Features & Benefits Cast iron construction - dynamically balanced
Grooves to the BS 3790 profile - suit SPC wedge belts and C section classical belts
No re-boring of the pulley - the bush carries the shaft bore and keyway
Pulls up concentric and releases cleanly for maintenance
SPC section 6 groove pulley - 800mm PCD
Supplied by Finer Power Transmissions
Taper lock bore - fits a 5050 bush up to 125mm shaft

The Finer PT SPC800-06 T/L is a 6 groove SPC section taper lock V-belt pulley with a 800mm pitch circle diameter (PCD) and 809.6mm outside diameter. It mounts on a 5050 taper lock bush with a maximum bore of 125mm.

Taper lock pulleys locate on the shaft through a separate tapered bush. The bush carries the shaft bore and keyway, so one pulley suits a wide range of shaft sizes, pulls up concentric as the screws are tightened and comes off cleanly for maintenance without damaging the shaft. SPC grooves are cut to the BS 3790 profile and take SPC wedge belts and C section classical belts.

Dimensions (mm – see the construction type 4 drawing):

  • Face width (F): 162
  • Hub length (L): 127
  • Hub diameter (N): 245
  • Rim inside diameter (J): 737
  • Hub offset (K): 17.5
  • Hub projection (M): 17.5

Please note: this pulley is bored to take a 5050 taper lock bush. When requesting a quote – include your shaft size so the matching bush can be supplied.

Supplied by Finer Power Transmissions.

No reviews yet. Used this part? Be the first to review it.

Related Products

More from the same range. Please check sizes and specifications before ordering.

Expert Assistance

We Help You Find It

Not sure what you need? Our Brisbane-based team actively help customers to identify parts — bring it in, send a photo, or just give us a call.

Bring It In

Walk into our Brendale store with the old part. We'll measure it, match it, and get you sorted on the spot.

Unit 2/348 S Pine Rd, Brendale QLD 4500 Get Directions

Send a Photo

Snap a photo of the part — include something for scale. Upload it here or email it and we'll identify it for you.

email us Or Upload Photo

Call Our Experts

Tell us what you need over the phone. Our experienced team can identify most parts from a part number, dimensions, application, or even a simple description.

Call (07) 3889 6200