Home Power Transmission Pulleys Taper Lock V-Belt Pulleys SPZ Pulleys Finer PT SPZ140-06 T/L Taper Lock V-Belt Pulley – 6 Grooves – 140mm PCD
Finer PT SPZ140-06 T/L Taper Lock V-Belt Pulley - 6 Grooves - 140mm PCD
SPZ140-06 T/L

Images are for illustrative purposes only. Actual product may vary.

Finer PT

Finer PT SPZ140-06 T/L Taper Lock V-Belt Pulley – 6 Grooves – 140mm PCD

Part Number: SPZ140-06 T/L
Outer Diameter 144 mm
Width 76 mm

Finer PT SPZ140-06 T/L taper lock v-belt pulley. SPZ section – 6 grooves – 140mm PCD x 144mm OD. Takes a 2517 taper lock bush – max bore 60mm. Cast iron construction.

Qty:
  • Cast iron construction - dynamically balanced
  • Grooves to the BS 3790 profile - suit SPZ wedge belts and Z section classical belts
  • No re-boring of the pulley - the bush carries the shaft bore and keyway
  • Pulls up concentric and releases cleanly for maintenance
  • SPZ section 6 groove pulley - 140mm PCD
  • Supplied by Finer Power Transmissions
  • Taper lock bore - fits a 2517 bush up to 60mm shaft
Brand

Finer PT
Product Type

Taper Lock V-Belt Pulley
Belt Section

SPZ
Number of Grooves

6
Pitch Circle Diameter (PCD)

140 mm
Outer Diameter

144 mm
Width

76 mm
Bore Type

Taper Lock
Compatible Parts

2517 Taper Lock Bush
Maximum Bore

60 mm
Construction Type

Type 2
Material

Cast Iron
Measurement System

Metric
Cross Reference Pulley: SPZ140-06 | Taper Lock Bush: 2517
Features & Benefits Cast iron construction - dynamically balanced
Grooves to the BS 3790 profile - suit SPZ wedge belts and Z section classical belts
No re-boring of the pulley - the bush carries the shaft bore and keyway
Pulls up concentric and releases cleanly for maintenance
SPZ section 6 groove pulley - 140mm PCD
Supplied by Finer Power Transmissions
Taper lock bore - fits a 2517 bush up to 60mm shaft

The Finer PT SPZ140-06 T/L is a 6 groove SPZ section taper lock V-belt pulley with a 140mm pitch circle diameter (PCD) and 144mm outside diameter. It mounts on a 2517 taper lock bush with a maximum bore of 60mm.

Taper lock pulleys locate on the shaft through a separate tapered bush. The bush carries the shaft bore and keyway, so one pulley suits a wide range of shaft sizes, pulls up concentric as the screws are tightened and comes off cleanly for maintenance without damaging the shaft. SPZ grooves are cut to the BS 3790 profile and take SPZ wedge belts and Z section classical belts.

Dimensions (mm – see the construction type 2 drawing):

  • Face width (F): 76
  • Hub length (L): 45
  • Rim inside diameter (J): 111
  • Hub projection (M): 31

Please note: this pulley is bored to take a 2517 taper lock bush. When requesting a quote – include your shaft size so the matching bush can be supplied.

Supplied by Finer Power Transmissions.

No reviews yet. Used this part? Be the first to review it.

Related Products

More from the same range. Please check sizes and specifications before ordering.

Expert Assistance

We Help You Find It

Not sure what you need? Our Brisbane-based team actively help customers to identify parts — bring it in, send a photo, or just give us a call.

Bring It In

Walk into our Brendale store with the old part. We'll measure it, match it, and get you sorted on the spot.

Unit 2/348 S Pine Rd, Brendale QLD 4500 Get Directions

Send a Photo

Snap a photo of the part — include something for scale. Upload it here or email it and we'll identify it for you.

email us Or Upload Photo

Call Our Experts

Tell us what you need over the phone. Our experienced team can identify most parts from a part number, dimensions, application, or even a simple description.

Call (07) 3889 6200