Koyo JTEKT

KOYO 6304-2RSC3 Deep Groove Ball Bearings

Part Number: 6304-2RSC3
Inner Diameter (Bore) 20 mm
Outer Diameter 52 mm
Width 15 mm
Seal Type 2RS
Clearance C3

KOYO 6304-2RSC3 single-row deep groove ball bearing – contact sealed (2rs). Bore 20mm x OD 52mm x width 15mm. Dynamic load rating 19.9 kN. C3 internal clearance.

Qty:
Brand

Koyo JTEKT

Bearing Type

Deep Groove Ball Bearings

Series

6304

Inner Diameter (Bore)

20 mm

Outer Diameter

52 mm

Width

15 mm

Seal Type

2RS

Material

Chrome Steel (AISI 52100)

Clearance

C3

Dynamic Load Rating (Cr)

19900 N (19.9 kN)

Static Load Rating (C₀)

7850 N

Limiting Speed (Grease)

9500 rpm

Fillet Radius (r min)

1.1 mm

Fatigue Load Limit (Cu)

0.660 kN

Weight

0.144 kg

The KOYO 6304-2RSC3 is a single-row deep groove ball bearing with double contact rubber seals (2RS) – measuring 20mm bore x 52mm outside diameter x 15mm width.

Load ratings: dynamic 19.9 kN (Cr) and static 7.85 kN (C0r) – fatigue load limit 0.660 kN. Limiting speed 9500 rpm with grease lubrication. Minimum fillet radius 1.1mm.

Deep groove ball bearings are the most widely used bearing type – carrying radial and axial loads in both directions with low friction and high running accuracy. The double contact rubber seals give superior protection against dust – dirt and moisture for contaminated environments – and retain the factory-filled grease for life.

C3 internal clearance: this bearing is supplied with greater than normal (CN) internal radial clearance. C3 suits applications with an interference fit on the shaft or in the housing – a temperature differential between the inner and outer rings – or shaft expansion under load – where the extra clearance prevents the bearing from becoming preloaded in service.

Manufactured by KOYO (JTEKT) in chrome steel to ISO standards.

No reviews yet. Used this part? Be the first to review it.

Expert Assistance

We Help You Find It

Not sure what you need? Our Brisbane-based team actively help customers to identify parts — bring it in, send a photo, or just give us a call.

Bring It In

Walk into our Brendale store with the old part. We'll measure it, match it, and get you sorted on the spot.

Unit 2/348 S Pine Rd, Brendale QLD 4500 Get Directions

Send a Photo

Snap a photo of the part — include something for scale. Upload it here or email it and we'll identify it for you.

email us Or Upload Photo

Call Our Experts

Tell us what you need over the phone. Our experienced team can identify most parts from a part number, dimensions, application, or even a simple description.

Call (07) 3889 6200