Images are for illustrative purposes only. Actual product may vary.
KOYO HK3020-2RS Needle Roller Bearing 30x37x20mm (Open End, Double Seal (2RS))
KOYO HK3020-2RS drawn cup needle roller bearing, open end, double seal (2rs). Bore 30mm, OD 37mm, width 20mm.
Product successfully added to the Quote List
- Drawn cup (shell type) needle roller bearing - thin-walled deep-drawn outer shell forms the raceway
- Fitted with double seal (2rs) for lubricant retention and contamination exclusion
- High radial load capacity from the needle roller complement
- Koyo (JTEKT) precision manufacture to JIS standards
- Lowest sectional height of any needle roller bearing for a very compact arrangement
- Maximum operating temperature approximately 140C
- Open ends (standard type) with a narrow flange gap to retain grease and exclude contaminants
- Press-fit into the housing bore - no axial location fixtures required
- Use with a hardened shaft or JR25x30x20.5 inner ring as the inner raceway
| Brand | Koyo JTEKT |
|---|---|
| Bearing Type | Drawn Cup Needle Roller Bearing |
| Series | HK |
| Measurement System | Metric |
| Inner Diameter (Bore) | 30 mm |
| Outer Diameter | 37 mm |
| Width | 20 mm |
| Configuration | Open End |
| Seal Type | Double Seal (2RS) |
| Material | Chrome Bearing Steel |
| Dynamic Load Rating (Cr) | 16800 N (16.8 kN) |
| Static Load Rating (C₀) | 27300 N (27.3 kN) |
| Limiting Speed (Grease) | 6500 rpm |
| Fillet Radius (r min) | 1 mm |
| Compatible Inner Ring | JR25x30x20.5 |
| Weight | 0.04 kg |
| Features & Benefits | Drawn cup (shell type) needle roller bearing - thin-walled deep-drawn outer shell forms the raceway Fitted with double seal (2rs) for lubricant retention and contamination exclusion High radial load capacity from the needle roller complement Koyo (JTEKT) precision manufacture to JIS standards Lowest sectional height of any needle roller bearing for a very compact arrangement Maximum operating temperature approximately 140C Open ends (standard type) with a narrow flange gap to retain grease and exclude contaminants Press-fit into the housing bore - no axial location fixtures required Use with a hardened shaft or JR25x30x20.5 inner ring as the inner raceway |
The KOYO HK3020-2RS is a drawn cup (shell type) needle roller bearing with open ends, for a 30mm shaft (metric series). Its thin-walled, deep-drawn outer shell forms the outer raceway, giving the lowest sectional height of any needle bearing while carrying high radial loads in a compact, economical package. Boundary dimensions 30 x 37 x 20mm.
The open-end (standard) type has a narrow flange gap that helps retain grease and exclude contamination. This variant has double seal (2rs) for retained lubrication and contamination exclusion in service. The bearing is press-fitted into the housing bore, so no axial location fixtures are needed; maximum operating temperature approximately 140C. Use with a hardened shaft or the JR25x30x20.5 inner ring as the inner raceway. Manufactured by Koyo (JTEKT), Japan.
Related Products
-
HK3020
KOYO HK3020 Needle Roller Bearing 30x37x20mm (Open End)
30 mm × 37 mm × 20 mm
Product successfully added to the Quote List
-
BK3020
KOYO BK3020 Needle Roller Bearing 30x37x20mm (Closed End)
30 mm × 37 mm × 20 mm
Product successfully added to the Quote List
-
TLA3020UU
IKO TLA3020UU Needle Roller Bearing 30x37x20mm (Open End)
30 mm × 37 mm × 20 mm
Product successfully added to the Quote List
-
TLA3020Z
IKO TLA3020Z Needle Roller Bearing 30x37x20mm (Open End)
30 mm × 37 mm × 20 mm
Product successfully added to the Quote List
-
TLAM3020
IKO TLAM3020 Needle Roller Bearing 30x37x20mm (Closed End)
30 mm × 37 mm × 20 mm
Product successfully added to the Quote List
-
HK2816
KOYO HK2816 Needle Roller Bearing 28x35x16mm (Open End)
28 mm × 35 mm × 16 mm
Product successfully added to the Quote List
-
HK2016
KOYO HK2016 Needle Roller Bearing 20x26x16mm (Open End)
20 mm × 26 mm × 16 mm
Product successfully added to the Quote List
-
HK2016-2RS
KOYO HK2016-2RS Needle Roller Bearing 20x26x16mm (Open End, Double Seal (2RS))
20 mm × 26 mm × 16 mm · Double Seal (2RS)
Product successfully added to the Quote List
We Help You Find It
Not sure what you need? Our Brisbane-based team actively help customers to identify parts — bring it in, send a photo, or just give us a call.
Bring It In
Walk into our Brendale store with the old part. We'll measure it, match it, and get you sorted on the spot.
Unit 2/348 S Pine Rd, Brendale QLD 4500 Get DirectionsSend a Photo
Snap a photo of the part — include something for scale. Upload it here or email it and we'll identify it for you.
email us Or Upload PhotoCall Our Experts
Tell us what you need over the phone. Our experienced team can identify most parts from a part number, dimensions, application, or even a simple description.
Call (07) 3889 6200
No reviews yet. Used this part? Be the first to review it.